Platform scales | OMEGA Waagen GmbH

Platform scales include individual platforms and combinations of platform and evaluation. Usually a platform size of 800 x 800 mm is not exceeded. Larger platforms are called floor scales or weighbridges. A further distinction is made by the number of load cells. In the design, a single point load cell or a double bending beam is usually used. Shear beam load cells are common for weighbridges.

protection class

Protection classes up to IP69K are available from OMEGA Waagen GmbH. This makes these platforms suitable for all areas of application, including the food and chemical industries. The protection class limits the usable range in terms of impermeability to dust, contact and water.

For most industrial applications, protection class IP67 will be sufficient. The technology is thus tightly protected against the penetration of dust and dirt and against contact. A temporary immersion is also possible. From here on, higher protection classes only differ in their impermeability to water ingress. IP68 allows permanent submersion. Cleaning with a steam or high-pressure cleaner is possible with IP69K. This is also the highest possible protection class.

Material

In most cases the platform is made of stainless steel. The substructure is available in steel, powder-coated and stainless steel. Aluminium is usually used for the load cell, but stainless steel variants are also available in our product range.

The choice of the material is strongly dependent on the desired use. For applications in the food sector, the substructure is also made of stainless steel. This material can also be treated with the usual cleaning agents.

consruction

The construction varies depending on the platform scale. For smaller ones, the substructure and the load plate are connected directly to the load cell. Larger ones require a corresponding construction between load plate and substructure.

The decisive factor is the optimal load introduction into the load cell in order to use the strength of the load cell, the corner load compensation.

variants

The variations of the platform scales are as versatile as their use. Nominal loads from a few grams up to 1,000 kg. Resolutions in the milligram range are possible with smaller platforms. Round and square platforms are found in our product range.

verified, calibrated or dakks

All platform scales are calibratable and can be calibrated. If desired, you will receive the scale calibrated and ready for use and can use it directly. Equipped with a factory calibration protocol, it can be used as part of a quality management system according to DIN EN ISO 9001.

 A DAkkS calibration enables the use within the scope of ISO TS. All calibrations and documentation can be ordered directly.

Accuracy class

The platform scales are offered in legal-for-trade accuracy class C3. Some of them can also be designed in accuracy class C6. This is the highest accuracy currently achievable in class C. Thus, a resolution twice as high as C3 can be achieved.

You can read more about the accuracy class in our blog. There the topic is described in detail.

Certificates

Our evaluation electronics have a type approval. This is a prerequisite for conformity assessment and thus for use in legal metrology.

 

This type approval can also be understood as a seal of quality. The tests are fully comprehensive and are carried out by a government agency.

Accessories

High-quality accessories from OMEGA Waagen GmbH extend the functionality of our platform scales. We offer our tripod in two sizes to cover all applications. The cables are protected inside the stand. Bluetooth and W-LAN are useful extensions for data transmission. ETHERNET and serial data transmission is also possible.

Transport trolleys provide mobility. The platform can be used comfortably and without much effort at different locations. The combination of several platforms is also conceivable and can be designed, for example, as with our picking table KT-01.

why buy from omega waagen gmbh?

We offer quality at a fair price. With our products we consistently focus on quality and functionality. In doing so, we always have the use by the customer in mind. We give many of our products to selected customers for testing before market launch.

 The knowledge gained from these tests is used for further development. We are pleased about every feedback on our products.

 We base our pricing on market prices. Feel free to compare, but please take the product quality into account. There are only a few manufacturers that can compete with our products in quality, versatility and connectivity. Those who can do it are usually well above the price offered by us.

we are here fr you!

Aftersales is not just a phrase for us. Even after the purchase we are there for you. No matter in which area you need support with the use of our scales, please contact us. We solve your problem in an uncomplicated, fast and competent way.

We are also happy to support you with our knowledge right from the planning stage of your projects. Our sales department will take on your task. The feasibility is checked and you will receive a qualified offer without hidden costs. It is precisely this service that our customers appreciate and make us a competent partner for industry.

Resellers are supplied by us with everything that is needed. Our marketing team creates individual sales documents for you. Cooperation is the keyword. We support you in the implementation of your goals. Contact us and we will find the right way for a common, successful cooperation.



Platform scales include individual platforms and combinations of platform and evaluation. Usually a platform size of 800 x 800 mm is not exceeded. Larger platforms are called floor scales or... mehr erfahren »
Fenster schließen
Platform scales | OMEGA Waagen GmbH

Platform scales include individual platforms and combinations of platform and evaluation. Usually a platform size of 800 x 800 mm is not exceeded. Larger platforms are called floor scales or weighbridges. A further distinction is made by the number of load cells. In the design, a single point load cell or a double bending beam is usually used. Shear beam load cells are common for weighbridges.

protection class

Protection classes up to IP69K are available from OMEGA Waagen GmbH. This makes these platforms suitable for all areas of application, including the food and chemical industries. The protection class limits the usable range in terms of impermeability to dust, contact and water.

For most industrial applications, protection class IP67 will be sufficient. The technology is thus tightly protected against the penetration of dust and dirt and against contact. A temporary immersion is also possible. From here on, higher protection classes only differ in their impermeability to water ingress. IP68 allows permanent submersion. Cleaning with a steam or high-pressure cleaner is possible with IP69K. This is also the highest possible protection class.

Material

In most cases the platform is made of stainless steel. The substructure is available in steel, powder-coated and stainless steel. Aluminium is usually used for the load cell, but stainless steel variants are also available in our product range.

The choice of the material is strongly dependent on the desired use. For applications in the food sector, the substructure is also made of stainless steel. This material can also be treated with the usual cleaning agents.

consruction

The construction varies depending on the platform scale. For smaller ones, the substructure and the load plate are connected directly to the load cell. Larger ones require a corresponding construction between load plate and substructure.

The decisive factor is the optimal load introduction into the load cell in order to use the strength of the load cell, the corner load compensation.

variants

The variations of the platform scales are as versatile as their use. Nominal loads from a few grams up to 1,000 kg. Resolutions in the milligram range are possible with smaller platforms. Round and square platforms are found in our product range.

verified, calibrated or dakks

All platform scales are calibratable and can be calibrated. If desired, you will receive the scale calibrated and ready for use and can use it directly. Equipped with a factory calibration protocol, it can be used as part of a quality management system according to DIN EN ISO 9001.

 A DAkkS calibration enables the use within the scope of ISO TS. All calibrations and documentation can be ordered directly.

Accuracy class

The platform scales are offered in legal-for-trade accuracy class C3. Some of them can also be designed in accuracy class C6. This is the highest accuracy currently achievable in class C. Thus, a resolution twice as high as C3 can be achieved.

You can read more about the accuracy class in our blog. There the topic is described in detail.

Certificates

Our evaluation electronics have a type approval. This is a prerequisite for conformity assessment and thus for use in legal metrology.

 

This type approval can also be understood as a seal of quality. The tests are fully comprehensive and are carried out by a government agency.

Accessories

High-quality accessories from OMEGA Waagen GmbH extend the functionality of our platform scales. We offer our tripod in two sizes to cover all applications. The cables are protected inside the stand. Bluetooth and W-LAN are useful extensions for data transmission. ETHERNET and serial data transmission is also possible.

Transport trolleys provide mobility. The platform can be used comfortably and without much effort at different locations. The combination of several platforms is also conceivable and can be designed, for example, as with our picking table KT-01.

why buy from omega waagen gmbh?

We offer quality at a fair price. With our products we consistently focus on quality and functionality. In doing so, we always have the use by the customer in mind. We give many of our products to selected customers for testing before market launch.

 The knowledge gained from these tests is used for further development. We are pleased about every feedback on our products.

 We base our pricing on market prices. Feel free to compare, but please take the product quality into account. There are only a few manufacturers that can compete with our products in quality, versatility and connectivity. Those who can do it are usually well above the price offered by us.

we are here fr you!

Aftersales is not just a phrase for us. Even after the purchase we are there for you. No matter in which area you need support with the use of our scales, please contact us. We solve your problem in an uncomplicated, fast and competent way.

We are also happy to support you with our knowledge right from the planning stage of your projects. Our sales department will take on your task. The feasibility is checked and you will receive a qualified offer without hidden costs. It is precisely this service that our customers appreciate and make us a competent partner for industry.

Resellers are supplied by us with everything that is needed. Our marketing team creates individual sales documents for you. Cooperation is the keyword. We support you in the implementation of your goals. Contact us and we will find the right way for a common, successful cooperation.

Topseller
Gas cylinder scale GW-01 Gas cylinder scale GW-01
ab 892,50 € * 928,20 € *
Waagen Plattform WP-01 Waagen Plattform WP-01
ab 238,00 € * 261,80 € *
Waagen Plattform WP-02 Waagen Plattform WP-02
ab 178,50 € * 190,40 € *
Waagen Plattform WP-03 Waagen Plattform WP-03
ab 654,50 € * 702,10 € *
Waagen Plattform WP-04 Waagen Plattform WP-04
ab 279,65 € * 303,45 € *
Waagen Plattform WP-05 Waagen Plattform WP-05
ab 523,60 € * 583,10 € *
Filter schließen
 
  •  
von bis
Für die Filterung wurden keine Ergebnisse gefunden!
Waagen Plattform WP-05
Waagen Plattform WP-05
Waagen Plattform WP-05 Unterbau und Wägeplatte aus Edelstahl Wägezelle Edelstahl, silikonbeschichtet, Schutzart IP67 Libelle und Fußschrauben Mit der Waagen Plattform WP-05 erhalten Sie die perfekte Waage für alle Bereiche, in denen es...
ab 523,60 € * 583,10 € *
Waagen Plattform WP-04
Waagen Plattform WP-04
Waagen Plattform WP-04 Rahmen und Wägeplatte aus Edelstahl V2A Single Point Wägezelle, Aluminium, Schutzart IP65 OIML-R60-Zulassung - Eichung Klasse III - bis 6000e Genauigkeitklasse C3 Fußschrauben, Libelle, 3 m Anschlusskabel Die...
ab 279,65 € * 303,45 € *
Waagen Plattform WP-03
Waagen Plattform WP-03
Waagen Plattform WP-03 Stahlbaukonstruktion, Gehäuse, Kleinteile und Wägeplatte aus Edelstahl, V2A - AISI 304 Single Point Wägezelle, Aluminium, Schutzart IP65 OIML-R60-Zulassung - Eichung Klasse III - bis 6000e Genauigkeitklasse C6...
ab 654,50 € * 702,10 € *
Waagen Plattform WP-01
Waagen Plattform WP-01
Waagen Plattform WP-01 Unterbau Stahl, lackiert Wägeplatte Edelstahl Single Point Wägezelle, Aluminium, Schutzart IP65 OIML-R60-Zulassung - Eichung Klasse III Fußschrauben, Libelle Die Waagenplattform WP-01 ist das günstige...
ab 238,00 € * 261,80 € *
Waagen Plattform WP-02
Waagen Plattform WP-02
Waagen Plattform WP-02 Unterbau Stahl, lackiert Wägeplatte Edelstahl Single Point Wägezelle, Aluminium, Schutzart IP65 OIML-R60-Zulassung - Eichung Klasse III Fußschrauben, Libelle Die Waagen Plattform WP-02 ist das günstige...
ab 178,50 € * 190,40 € *
Gas cylinder scale GW-01
Gas cylinder scale GW-01
Gas cylinder scale GW-01 The GW-01 gas cylinder scale is a small platform scale with ramps inlaid on both sides. Via these ramps gas cylinders and similar goods can be easily moved onto the platform. The low platform height optimally...
ab 892,50 € * 928,20 € *
Plattformwaage PW-01
Platform scale PW-01
Platform scale PW-01 Dimensions: 400 x 500 x 140 mm Stainless steel substructure Stainless steel platform Sinlge Point load cell aluminum Degree of protection IP65 With evaluation WA-01
940,10 € *
Plattformwaage PW-01
Platform scale PW-02
Plattform scale pw-02 Dimensions: 330 x 330 x 93 mm Steel substructure, powder-coated Stainless steel platform Sinlge Point load cell aluminum Degree of protection IP65 With evaluation WA-01
999,60 € *
Zuletzt angesehen