Topseller
Palettenwaage PW-01 Pallet Scale PW-01 | OMEGA Waagen GmbH
Inhalt 1 Stück
ab 1.225,70 € *
Lifting device floor scales Lifting device floor scales
ab 499,80 € * 571,20 € *
Lifting device floor scales Lifting device floor scales
499,80 € * 571,20 € *
Pallet Scale PW-01 | OMEGA Waagen GmbH Pallet Scale PW-01 | OMEGA Waagen GmbH
Inhalt 1 Stück
ab 1.547,00 € *
Durchfahrwaage DW-01 - Mit Auswertung WA-01 Roll trough scale DW-01
ab 1.725,50 € * 1.915,90 € *
Wägebrücke BW-01 - 1500 x 1500 mm - mit Auswertung WA-01 Floor Scale BW-01
ab 1.725,50 € * 1.844,50 € *
Filter schließen
 
  •  
von bis
Für die Filterung wurden keine Ergebnisse gefunden!
Rohrbahnwaage D-TWG
Rohrbahnwaage D-TWG
Die Rohrbahnwaage D-TWG ist ein Modul für Rohrbahnen. Es lässt sich leicht an neue und bestehende Systeme anpassen. Ausgestattet mit zwei Edelstahlwägezellen mit der Schutzart IP68, die für den eichpflichtigen Verkehr zugelassen sind....
1.178,10 € *
Pallet Scale PW-01 | OMEGA Waagen GmbH
Pallet Scale PW-01 | OMEGA Waagen GmbH
Pallet sca le PW-01 | OMEGA Waagen GmbH The pallet scale PW-01 from OMEGA Waagen GmbH leaves nothing to be desired. Light and portable, it can be set up quickly and easily in a wide variety of locations. Reproducible and high-resolution...
Inhalt 1 Stück
ab 1.547,00 € *
Collision protection | OMEGA Waagen GmbH
Collision protection | OMEGA Waagen GmbH
The collision protection primarily serves to protect the floor scale from damage. A small bogie with a forklift can have persistent effects on the measuring equipment and can be expensive. With a solid construction, the collision...
ab 630,70 € *
Lifting device floor scales
Lifting device floor scales
Fußplattenset | OMEGA Waagen GmbH Bodenwaage im eichpflichtigen Verkehr müssen ausgerichtet werden und vor verrücken gesichert werden. Dies kann durch die Verwendung in einem Grubenrahmen, durch einen Anfahrschutz oder eine Rampe...
630,70 € *
Lifting device floor scales
Lifting device floor scales
Auffahrrampen Bodenwaage BW-01 Mit unseren Auffahrrampen machen Sie aus einer Überflur aufgestellten Bodenwaagen BW-01 eine Auffahr- oder Überfahrwaage. Die Rampe wird fest am Boden fixiert. Mit den Stellfüßen wird die Waage so in die...
499,80 € * 571,20 € *
Lifting device floor scales
Lifting device floor scales
Grubenrahmen | OMEGA Waagen GmbH Die Grubenrahmen ermöglichen den Einbau der Bodenwaage BW-01. Damit kann die Waage als Unterflurwaage verwendet werden. Stolperkanten sind damit beseitigt und die Unfallgefahr wird gemindert. Optional ist...
ab 416,50 € *
Lifting device floor scales
Lifting device floor scales
Hebevorrichtung | OMEGA Waagen GmbH Mit der Hebevorrichtung für flächige Lasten, insbesondere für Bodenwaagen, können diese im Rahmen der UVV sicher bewegt werden. Anders als bei dem Transport mit Ösen und Ketten an einem Gabelstapler...
ab 499,80 € * 571,20 € *
Edelstahl Bodenwaage BW-02
Edelstahl Bodenwaage BW-02
ab 2.772,70 € *
Durchfahrwaage DW-01 - Mit Auswertung WA-01
Roll trough scale DW-01
Die Durchfahrwaage DW-01
ab 1.725,50 € * 1.915,90 € *
Palettenwaage PW-01
Pallet Scale PW-01 | OMEGA Waagen GmbH
Pallet sca le PW-01 | OMEGA Waagen GmbH The pallet scale PW-01 from OMEGA Waagen GmbH leaves nothing to be desired. Light and portable, it can be set up quickly and easily in a wide variety of locations. Reproducible and high-resolution...
Inhalt 1 Stück
ab 1.225,70 € *
Wägebrücke BW-01 - 1500 x 1500 mm - mit Auswertung WA-01
Floor Scale BW-01
High-precision weighing platforms Weighing platforms belong to the floor scales. High load ranges and a robust construction make these scales for use in a harsh industrial environment Degree of protection OMEGA Waagen GmbH offers...
ab 1.725,50 € * 1.844,50 € *

High precision floor scale | OMEGA Waagen GmbH

The highest quality, made in Germany, distinguishes the floor scales from OMEGA Waagen GmbH. A floor scale must neither weigh nor sag. This would falsify the weighing result. Therefore, we rely on a well thought-out construction and use 5 mm thick steel. Despite the solid construction, we were able to implement a particularly flat construction with a height of only 80 mm. This enables loading with a lifting scale when using ramps. With an underfloor installation, the effort is kept lower than with many competitor products. The arrangement of the load cells guarantees excellent results with a resolution that is rarely found on the market.

We only use OMEGA load cells that meet the highest demands in terms of quality, accuracy, reproducibility and durability. These are stored on load feet with ball joints, which ensure excellent load transfer. The protection class of the load cells for our floor scales is IP67. This exceeds the frequently used protection class IP65 in protection against water. While a scale with protection class IP65 is only protected against water jets, a scale with protection class IP67 can even be temporarily submerged. An invaluable advantage for all users who need a particularly robust floor scale.

We set new standards for industrial floor scales

For simple applications, we equip the floor scale with the WA-01 evaluation electronics. What we describe as simple presents many competitors with difficult challenges. Whatever the requirements of our customers, they can be implemented with the WA-08 evaluation electronics. We hereby set new standards in many applications for floor scales.

Connection to the ERP system, recording of barcodes or printing of the weighing results are unproblematic. Power can be supplied via the power supply or the optionally available, rechargeable solution installed ex works.

At 3000 kg, our floor scales still measure to an accuracy of 100 g

Maximum precision when weighing and robustness when weighing large loads is essential in industry. That is why we have made it our task to only manufacture high-precision industrial scales that can easily withstand high loads. Even with a large weighing range of up to 3000 kg, the maximum resolution of our floor scale is 100 g. In the weighing range of 150 kg, the maximum resolution is even 10 g.

Our floor scales are available as standard in the following sizes:

1,000 x 1,000 mm

1,000 x 1,250 mm

1,250 x 1,500 mm

1,500 x 1,500 mm

1,500 x 2,000 mm

We would be happy to realize special sizes for you - uncomplicated, fast and inexpensive.

Above or below floor: We have a model for every application

The high-precision floor scales from OMEGA Waagen GmbH are primarily available as above-floor scales. If the floor scales are used above ground, ramps are required to drive up. You can get the scale with one or two ramps, optionally also with a collision protection. We recommend using a circumferential collision protection for every model above floor so that the floor scale is protected against bumps and accidental starting. If you use ramps, the protection can also be attached on three or two sides.

The loading takes place with forklifts, electric lifting scales, pedestrian lifting scales or other industrial trucks used in logistics. If forklifts are also used, a combination of ramps and collision protection is recommended.

Above-floor stacker green

An underfloor application in combination with the pit frame can be implemented easily and cleanly. The effort is greater, but this variant of the floor scales offers clear advantages in terms of saving time. Here users should definitely work with stops in order to prevent overloading the floor scales. We prepare the attacks in the factory.

Underfloor stacker gr-un

Easy to clean thanks to high quality stainless steel

In some applications, for example in the food industry or chemical industry, stainless steel has to be used for the floor scales. Easy and efficient cleaning must also be possible. Of course, the high-precision floor scales from OMEGA Waagen GmbH are also available in stainless steel, optionally with a removable or erectable lid. Depending on the application, we can use load cells up to protection class IP69K, which then enables cleaning with a high-pressure or steam cleaner.

The evaluation

 

The scope of delivery includes the evaluation electronics WA-01. Our powerful display device enables quick visual recording of the weighing results through the backlit display with the 25 mm high digits. The housing made of aluminum offers optimal protection of the electronics and has a particularly high-quality feel. Instead of the usual lead acid battery, we rely on significantly smaller, lighter and more durable technology. A lithium ion power bank provides the WA-01 evaluation with the necessary energy for many hours. The display can also be used while charging via USB (plug network included). The charging process can also be carried out via another power bank or a notebook, which enables 24/7 use.

 

The data transfer can take place with the optionally available Bluetooth or W-LAN module. A display on an Andorid device is also possible after installing the required free app. With these and other features, we have arrived in the present and already allow a look into the future of weighing technology. Calibration or calibration is of course also possible.

 

Calibration or calibration - as you wish

 

A calibrated floor scale is always required if it is used to determine a weight for calculating a price. There are also other provisions that require calibration. We will inform you in detail on our blog. Calibrated floor scales are typically offered as follows:

 

Ø 3000 kg floor scale with a resolution of 1,000 g

 

Ø floor scale 1500 kg with a resolution of 500 g

 

Floor scales 1000 kg are rather unusual, but would also have a resolution of 500 g. This is due to the accuracy class C3, which occurs in most load cells in this area.

 

We offer scales with the same weighing range in twice the resolution. We achieve this by using C6 load cells. In addition, we can also design these as multi-range scales. This results in significantly better application options for you.

 

Floor scale industry as a single-range scale:

 

            Floor scale 3000 kg, readability 1,000 g

 

Floor scale industry as a multi-range scale:

 

            Floor scales 600 kg / 1500 kg / 3000 kg

 

            Resolution 200 g / 500 g / 1,000 g

 

With a multi-range scale you get practically 3 scales in one. This enables you to meet requirements for higher resolutions in lower weight ranges.

 

Verification is only possible in conjunction with a legal-for-trade display device. The combination of platform and display, both verifiable, makes verification possible in the first place. Weighing with a calibrated scale guarantees results within the limits of traffic errors.

 

The calibration can be divided into the factory calibration and the DAkkS calibration. A factory calibration is sufficient for a company certified according to DIN EN 9001. A DAkkS calibration is required if your company is certified according to SIO TS 16949.

 

Why an OMEGA scale?

 

Our brand stands for quality made in Germany. In particular, our weighing platforms, calibrated or calibrated, also meet the highest standards of quality and functionality. For weighing pallets, this model provides you with a robust construction made of steel or stainless steel. Pallets with loads up to 3,000 kg can be weighed quickly and easily on the weighing platform.

 

Equipped with evaluation electronics of excellent quality with various data transmission options, we provide you with added value for your processes that is measurable. Contact our sales team (0 44 47) 969 463 - 0 and let us convince you of our product quality. Custom-made products can also be implemented in our own production.

Zuletzt angesehen