Highly precise weighing platforms | OMEGA Waagen GmbH

Weighbridges belong to the floor scales. High load ranges and a robust construction make these scales suitable for use in a harsh industrial environment.

 

protection class

OMEGA Waagen GmbH offers drive-through scales up to a protection class of IP69K. This refers to the construction, the load cells, the terminal and trim box and the connectors. The evaluation electronics are available up to protection class IP68.

 

Material

With us you receive the drive-through scale in steel, powder-coated. A galvanized version is also possible. Stainless steel is mainly used in the food and chemical industry and this material is also used for our drive-through scales. Thus we offer a solution for every area of application.

 

construction

Compared to a platform or weighbridge, the construction of a drive-through scale is much more complex. The weighing equipment is placed in a frame and the load plate is placed between this construction in such a way that the lowest possible drive-on height is achieved. We were thus able to achieve an access height of just 52 mm.

 

Variants

We offer our drive-through scales in 3 dimensions. With them we can cover all common applications:

 

Dimensions

Nominal load

Resolution

800 x 800 x 52 mm

600 kg

200 g

1000 x 1200 x 52 mm

1.500 kg

500 g

1250 x 1500 x 52 mm

2.000 kg

1.000 g

 

If you need a special size, we are the right contact. With our own construction we realize your special requirements.

verified, baubrated or dakks

Each of our drive-through scales is calibratable and arrives at your premises fully calibrated when ordered. You can use the scale directly in legal metrology. If your company is certified according to DIN EN ISO 9001, documented calibration is required. In this case, a factory calibration certificate is sufficient and will be issued by us upon order placement. During the calibration procedure, we proceed in the same way as for verification according to DIN EN 45501, but in the case of factory calibration, the deviation determined is shown. During calibration, it is shown that the balance operates within the permissible error limits.

 Are you certified according to ISO TS? Then a DAkkS calibration is required. This complex process can be ordered optionally. We carry out the calibration and document this with the calibration certificate enclosed with the delivery.

Since verification and calibration is a recurring process, scales must be included in the monitoring of measuring equipment. We will also be pleased to support you in this respect. On request, we can take over the deadline monitoring for you - free of charge and without obligation. We will inform you in time about upcoming tests. On request, we can also carry out these for you.

data transmisson

The data transmission depends on the evaluation electronics used. We offer different possibilities. Thus we enable you to integrate the scale into your existing process environment in an optimal way. Our competent software team also realizes special software solutions for you.

Certificates

For the evaluation electronics used, we have the necessary approvals to be allowed to use these products in the European Economic Area, in accordance with Directive 2014/31/EU, in legal metrology.

Made in germany

Our drive-through scales are manufactured in Germany! The complete construction is made in our house. The metal construction is implemented by a supplier in Germany according to our specifications. The WA-01 is also produced in Germany. The final assembly and all necessary tests are carried out exclusively in our production facility in Vechta - Langförden.

Thus our drive-through weighers have earned the predicate "Made in Germany". Ask the competition where the platforms come from. Please note that an importer from a third country within the EU acts as manufacturer. If a German manufacturer sells an OEM product, this does not mean that this product was also manufactured in Germany.

why buy from omega waagen gmbh?

Because we are the best choice! OMEGA Waagen GmbH is characterized by competence and know-how from the first idea, through design and production planning, to product realization. A continuous improvement of our production processes and products gives us the opportunity to grow with the tasks set by our customers. Challenge us, so that we become better and better for you.

 We rely on Germany as a production location, right from the start. Competent and reliable partners support us so that we can produce the best scales for you.

we are there for you!

Suggestions from our customers offer us the opportunity for improvement and we are happy to accept them. Even after the purchase we are at your disposal. Be it for the connection, questions about the installation or also about the use. The support of our customers beyond the delivery is a matter of course for us.

Please contact us if you have questions, suggestions or if you need help. Our sales team is your first contact and will forward your questions if necessary. With us, every customer is a first-class customer and every customer has a key account manager - our sales team.

Weighbrides | omea waagen gmbh

Floor scales, weighbridges or even platform scales often refer to the same type of scale. While platform scales are rather smaller scales that are placed on the floor or a table, floor scales and weighbridges are more solid designs that can be used above or below ground. Weighbridges are asynonym for floor scales and the term is used in this text in the same way. You can purchase our weighbridge BW-01 directly from the manufacturer in Germany.

The Material  

Our weighbridges are available in powder-coated steel or stainless steel. The robust steel construction can be used wherever weights of up to 3,000 kg have to be determined quickly and reproducibly. The stainless steel version is designed for use in the food and chemical industries. Here, it is particularly important to be able to clean thoroughly, and we respond to this requirement with weighing technology in protection class IP69K, which is optionally available.



Weighbridges belong to the floor scales. High load ranges and a robust construction make these scales suitable for use in a harsh industrial environment.   protection class... mehr erfahren »
Fenster schließen
Highly precise weighing platforms | OMEGA Waagen GmbH

Weighbridges belong to the floor scales. High load ranges and a robust construction make these scales suitable for use in a harsh industrial environment.

 

protection class

OMEGA Waagen GmbH offers drive-through scales up to a protection class of IP69K. This refers to the construction, the load cells, the terminal and trim box and the connectors. The evaluation electronics are available up to protection class IP68.

 

Material

With us you receive the drive-through scale in steel, powder-coated. A galvanized version is also possible. Stainless steel is mainly used in the food and chemical industry and this material is also used for our drive-through scales. Thus we offer a solution for every area of application.

 

construction

Compared to a platform or weighbridge, the construction of a drive-through scale is much more complex. The weighing equipment is placed in a frame and the load plate is placed between this construction in such a way that the lowest possible drive-on height is achieved. We were thus able to achieve an access height of just 52 mm.

 

Variants

We offer our drive-through scales in 3 dimensions. With them we can cover all common applications:

 

Dimensions

Nominal load

Resolution

800 x 800 x 52 mm

600 kg

200 g

1000 x 1200 x 52 mm

1.500 kg

500 g

1250 x 1500 x 52 mm

2.000 kg

1.000 g

 

If you need a special size, we are the right contact. With our own construction we realize your special requirements.

verified, baubrated or dakks

Each of our drive-through scales is calibratable and arrives at your premises fully calibrated when ordered. You can use the scale directly in legal metrology. If your company is certified according to DIN EN ISO 9001, documented calibration is required. In this case, a factory calibration certificate is sufficient and will be issued by us upon order placement. During the calibration procedure, we proceed in the same way as for verification according to DIN EN 45501, but in the case of factory calibration, the deviation determined is shown. During calibration, it is shown that the balance operates within the permissible error limits.

 Are you certified according to ISO TS? Then a DAkkS calibration is required. This complex process can be ordered optionally. We carry out the calibration and document this with the calibration certificate enclosed with the delivery.

Since verification and calibration is a recurring process, scales must be included in the monitoring of measuring equipment. We will also be pleased to support you in this respect. On request, we can take over the deadline monitoring for you - free of charge and without obligation. We will inform you in time about upcoming tests. On request, we can also carry out these for you.

data transmisson

The data transmission depends on the evaluation electronics used. We offer different possibilities. Thus we enable you to integrate the scale into your existing process environment in an optimal way. Our competent software team also realizes special software solutions for you.

Certificates

For the evaluation electronics used, we have the necessary approvals to be allowed to use these products in the European Economic Area, in accordance with Directive 2014/31/EU, in legal metrology.

Made in germany

Our drive-through scales are manufactured in Germany! The complete construction is made in our house. The metal construction is implemented by a supplier in Germany according to our specifications. The WA-01 is also produced in Germany. The final assembly and all necessary tests are carried out exclusively in our production facility in Vechta - Langförden.

Thus our drive-through weighers have earned the predicate "Made in Germany". Ask the competition where the platforms come from. Please note that an importer from a third country within the EU acts as manufacturer. If a German manufacturer sells an OEM product, this does not mean that this product was also manufactured in Germany.

why buy from omega waagen gmbh?

Because we are the best choice! OMEGA Waagen GmbH is characterized by competence and know-how from the first idea, through design and production planning, to product realization. A continuous improvement of our production processes and products gives us the opportunity to grow with the tasks set by our customers. Challenge us, so that we become better and better for you.

 We rely on Germany as a production location, right from the start. Competent and reliable partners support us so that we can produce the best scales for you.

we are there for you!

Suggestions from our customers offer us the opportunity for improvement and we are happy to accept them. Even after the purchase we are at your disposal. Be it for the connection, questions about the installation or also about the use. The support of our customers beyond the delivery is a matter of course for us.

Please contact us if you have questions, suggestions or if you need help. Our sales team is your first contact and will forward your questions if necessary. With us, every customer is a first-class customer and every customer has a key account manager - our sales team.

Weighbrides | omea waagen gmbh

Floor scales, weighbridges or even platform scales often refer to the same type of scale. While platform scales are rather smaller scales that are placed on the floor or a table, floor scales and weighbridges are more solid designs that can be used above or below ground. Weighbridges are asynonym for floor scales and the term is used in this text in the same way. You can purchase our weighbridge BW-01 directly from the manufacturer in Germany.

The Material  

Our weighbridges are available in powder-coated steel or stainless steel. The robust steel construction can be used wherever weights of up to 3,000 kg have to be determined quickly and reproducibly. The stainless steel version is designed for use in the food and chemical industries. Here, it is particularly important to be able to clean thoroughly, and we respond to this requirement with weighing technology in protection class IP69K, which is optionally available.

Topseller
Lifting device floor scales Lifting device floor scales
ab 499,80 € * 571,20 € *
Lifting device floor scales Lifting device floor scales
499,80 € * 571,20 € *
Wägebrücke BW-01 - 1500 x 1500 mm - mit Auswertung WA-01 Floor Scale BW-01
ab 1.725,50 € * 1.844,50 € *
Filter schließen
 
  •  
von bis
Für die Filterung wurden keine Ergebnisse gefunden!
Collision protection | OMEGA Waagen GmbH
Collision protection | OMEGA Waagen GmbH
The collision protection primarily serves to protect the floor scale from damage. A small bogie with a forklift can have persistent effects on the measuring equipment and can be expensive. With a solid construction, the collision...
ab 630,70 € *
Lifting device floor scales
Lifting device floor scales
Fußplattenset | OMEGA Waagen GmbH Bodenwaage im eichpflichtigen Verkehr müssen ausgerichtet werden und vor verrücken gesichert werden. Dies kann durch die Verwendung in einem Grubenrahmen, durch einen Anfahrschutz oder eine Rampe...
630,70 € *
Lifting device floor scales
Lifting device floor scales
Auffahrrampen Bodenwaage BW-01 Mit unseren Auffahrrampen machen Sie aus einer Überflur aufgestellten Bodenwaagen BW-01 eine Auffahr- oder Überfahrwaage. Die Rampe wird fest am Boden fixiert. Mit den Stellfüßen wird die Waage so in die...
499,80 € * 571,20 € *
Lifting device floor scales
Lifting device floor scales
Grubenrahmen | OMEGA Waagen GmbH Die Grubenrahmen ermöglichen den Einbau der Bodenwaage BW-01. Damit kann die Waage als Unterflurwaage verwendet werden. Stolperkanten sind damit beseitigt und die Unfallgefahr wird gemindert. Optional ist...
ab 416,50 € *
Lifting device floor scales
Lifting device floor scales
Hebevorrichtung | OMEGA Waagen GmbH Mit der Hebevorrichtung für flächige Lasten, insbesondere für Bodenwaagen, können diese im Rahmen der UVV sicher bewegt werden. Anders als bei dem Transport mit Ösen und Ketten an einem Gabelstapler...
ab 499,80 € * 571,20 € *
Edelstahl Bodenwaage BW-02
Edelstahl Bodenwaage BW-02
ab 2.772,70 € *
Wägebrücke BW-01 - 1500 x 1500 mm - mit Auswertung WA-01
Floor Scale BW-01
High-precision weighing platforms Weighing platforms belong to the floor scales. High load ranges and a robust construction make these scales for use in a harsh industrial environment Degree of protection OMEGA Waagen GmbH offers...
ab 1.725,50 € * 1.844,50 € *

Highly precise weighing platforms | OMEGA Waagen GmbH

Weighing platforms belong to the floor scales. High load ranges and a robust construction make these scales for use in a harsh industrial environment

Degree of protection

OMEGA Waagen GmbH offers drive-through scales up to protection class IP69K. This refers to the construction, the load cells, the terminal and trim box and the plug connections. The evaluation electronics are available up to protection class IP68.

Material

We supply the drive-through scale in steel, powder-coated. A galvanized version is also possible. Stainless steel is mainly used in the food and chemical industries and this material is also used for our drive-through scales. We offer a solution for every application.

Construction

Compared to a platform or weighing platform, the construction of a drive-through scale is significantly more complex. The weighing technology is housed in a frame and the load plate is attached between this construction so that the lowest possible approach height is achieved. We were able to achieve an approach height of just 52 mm.

Variants

We offer our drive-through scales in 3 sizes. We can cover all common applications:

If you need a special size, we are the right contact. We realize your special requirements with our own construction.

Calibrated, calibrated or DAkkS

Each of our drive-through scales is legal-for-trade and will be delivered to you fully calibrated when ordered. You can use the scale directly in legal-for-trade traffic. If your company is certified according to DIN EN ISO 9001, a documented calibration is required. A factory calibration certificate is sufficient here and will be issued by us when the order is placed. We proceed in the calibration process analogously to the calibration according to DIN EN 45501, but the deviation found is shown in the factory calibration. During the calibration, it is shown that the balance works within the permissible error limits.

Are you ISO TS certified? Then a DAkkS calibration is required. This complex process can optionally be commissioned. We carry out the calibration and document this with the calibration certificate enclosed with the delivery.

Since calibration and calibration is a recurring process, scales must be included in the measuring equipment monitoring. We are happy to support you in this too. On request, we can take over the appointment monitoring for you - free of charge and without obligation. We will inform you about upcoming exams in good time. On request, we can also do this for you.

Data transfer

The data transmission depends on the evaluation electronics used. We offer different options. This enables us to optimally integrate the scale into your existing process landscape. Our competent software team also implements special software solutions for you.

Certificates

For the evaluation electronics used, we have the necessary approvals to be able to use these products in custody transfer in the European economic area in accordance with Directive 2014/31 / EU.

Made in Germany

Our drive-through scales are manufactured in Germany! The complete construction is done in our house. The metal construction is carried out by a supplier in Germany according to our specifications. The WA-01 is also produced in Germany. The final assembly and all necessary tests are carried out exclusively in our production facility in Vechta - Langförden.

Our drive-through scales have earned the title “Made in Germany”. Ask the competition where the platforms come from. Please note that an importer from a third country acts as a manufacturer within the EU. So if a German manufacturer sells an OEM product, it does not mean that this product was also made in Germany.

Why buy from OMEGA Waagen GmbH?

Because we are the best choice! Competence and know-how from the first idea, through the construction and the production planning to the product realization characterize OMEGA Waagen GmbH. Constant improvement of our production processes and products offer us the opportunity to grow in the tasks set by our customers. Challenge us so that we can always improve for you.

We have relied on Germany as a production location right from the start. Competent and reliable partners support us so that we can produce the best balance for you.

We are here for you!

Suggestions from our customers give us the opportunity to improve and we are happy to accept this. We are also available after the purchase. Be it the connection, questions about the installation or use. Taking care of our customers beyond delivery is a matter of course for us.

Feel free to contact us with any questions, suggestions or if you need help. Our sales team is your first point of contact and will forward your questions if necessary. With us, every customer is a first-class customer and every customer has a key account manager - our sales team.

Weighing platforms | OMEGA Waagen GmbH

Floor scales, weighing platforms or platform scales in many cases refer to the same type of scale. While platform scales are rather smaller scales that are placed on the floor or on a table, floor scales and weighing platforms are more solid designs that can be used above or below floor. Weighing platforms are synonymous with floor scales and the terminology is also used in this text. Obtain our BW-01 weighing platform directly from the manufacturer in Germany.

The material

Our weighing platforms are available in powder-coated steel or stainless steel. The robust steel construction can be used wherever weights up to 3,000 kg have to be determined quickly and easily. The stainless steel version is designed for use in the food and chemical industries. Here it is particularly important to be able to clean thoroughly and we respond to this requirement with weighing technology with protection class IP69K, which is optionally available.

Product test

The material thickness is particularly noteworthy. We use 5 mm steel for our weighing platforms. Thanks to the well thought-out design, we were able to generate a very high level of torsional rigidity. This enabled us to achieve excellent weighing results. Before a floor scale goes on sale, it is subjected to extensive tests. In particular, the resolution, the creeping error and the reproducibility are important indices for product quality control. Only when all tests with excellent results have been passed do the products go on sale.

The production

A stable construction, developed in Germany, ensures reproducible values. The steel structure is produced exclusively in Germany, which means that we meet the highest standards. Our weighing technology is used in the production in the weighing platforms. This is how we guarantee genuine Made in Germany quality at unrivaled prices.

Zuletzt angesehen