Weighing beams from OMEGA Waagen GmbH for all applications in industry and agriculture. The high-resolution weighing beams can be used in almost all applications. With lengths from 800 to 2000 mm, they can be used covered for all applications. In-house production at the Vechta production site also makes individual solutions possible quickly and easily.
Our weighing beams are available with weighing ranges up to 3,000 kg. Steel, powder-coated or hot-dip galvanized and stainless steel versions can be found in our extensive product range.
Executions
Our product range is as extensive as our customers' requirements are so often. Our products are designed so that scales from our standard range can be used for most applications. In this way we keep costs low and shorten delivery times.
Our weighing beams are available as standard in the following versions:
Ø weighing beam WB 800
Length 800 mm, steel powder-coated or hot-dip galvanized,
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 800N
Length 800 mm, stainless steel
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 1200
Length 1200 mm, steel powder-coated or hot-dip galvanized,
weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 1200N
Length 1200 mm, stainless steel
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 1500
Length 1500 mm, steel powder-coated or hot-dip galvanized,
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 1500N
Length 1500 mm, stainless steel
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 2000
Length 2000 mm, steel powder-coated or hot-dip galvanized,
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
Ø weighing beam WB 2000N
Length 2000 mm, stainless steel
Weighing ranges (readability): 600 kg (100 g), 1,500 kg (200 g), 3,000 kg (500 g)
What is the difference?
The well thought-out construction! We rely on quality made in Germany. The steel construction consists of 6 mm thick square tube and thus sets standards in product quality. The use of square tubes enables a low overall height and also creates a larger contact area compared to square tubes.
We do not restrict you to the possibility of fastening your construction to the weighing beam with just a few tabs. There are perforated strips on both sides of the weighing beams for individual attachment of your construction.
The built-in weighing technology is designed at least in protection class IP67 and thus also allows it to be used outdoors. Temporary immersion is possible. Upon request, the load cells and all plug connections can also be designed with IP69K protection. This enables cleaning with steam or high-pressure cleaners.
The weighing technology is structurally protected against rodents. The gap dimensions are so small that no rodent can penetrate the inside of the weighing beams and therefore not to the load cell cables.
With all the advantages, the price is a decisive factor in your considerations. We are aware of this and have calculated with a sharp pen. If cheap imports are left out, our weighing beams are cheaper than those of most competitors despite the significantly higher product quality. Despite the production in Germany, we can set customer-oriented prices because we pay attention to a flat personnel structure. Unnecessary costs are avoided and the resulting price advantage is passed on directly to our customers.
Calibration / calibration
Our weighing beams can be calibrated on request. Your design is taken into account in the conformity assessment process. However, the use of evaluation electronics from OMEGA Waagen GmbH (WA-01, WA-08, ...) is required. The conformity assessment is carried out in accordance with DIN 45501.
A factory calibration can also be carried out when using an evaluation from our company or providing existing weighing electronics. The procedure is the same as for verification, but without affixing the legal verification markings. On request, we can issue you a calibration report as part of the ISO calibration. This is sufficient for quality management systems that are certified according to DIN EN ISO 9001.
A DAkkS calibration is also possible when using one of our evaluations or by providing an external evaluation. The protocol complies with the requirements of ISO TS.